Papers from 2024
Influence of water saturation duration on the mechanical properties and toughness index of Australian coal, Itmam Abedin and Ting Ren
A niche application of permanent CO2 disposal from coal-fired power stations via mineralisation in proximal mafic and ultramafic deposits, Muhannad Al Kalbani, Mehdi Serati, Harald Hoffman, and Thierry Bore
Variations in the mechanical properties of coal related to structural deformation and burst events, James Anderson, Ismet Canbulat, and Serkan Saydam
Proceedings of the 2024 Resource Operators Conference, Naj Aziz, Kevin Marston, and Zhenjun Shan
Measurements of the height of fracturing and height of depressurisation above a longwall panel, Ben Blacka, Adrian Rippon, and Nick Le Baut
A case study of coal seam UIS hydraulic fracturing practices and resultant mining conditions, Richard Campbell, Kyle McLennan, Andrew Seccombe, Kerri Smit, and Brent Creevey
Effects of pumping infrastructure on mine production during a wet season – a case study, Luke Chase-Dunlop and Ernest Baafi
Component-level material characterization of timber chocks, Mohsen Dehghanipoodeh, Hossein Masoumi, and Javad Hashemi
Application of waste glass powder in cemenitious grouts, Alireza Entezam, Hadi Nourizadeh, Ali Mirzaghorbanali, Polly Burey, Tristan Shelley, and Naj Aziz
Investigating the axial and shear performance of fiberglass rock bolts, Shima Entezam, Behshad Jodeiri Shokri, Hadi Nourizadeh, Peter Gregor, Alireza Entezam, Ali Mirzaghorbanali, Kevin McDougall, Waru Karunasena, and Naj Aziz
Issues affecting uranium mining in the 21st century, Tim Gibbons
Active ultrasonic monitoring of damage progression in coal under uniaxial compression, Jiangwan He, Mehdi Serati, Martin Veidt, and Alessandro Carcione
Development of a Protodyakonov test from gas drainage core samples and empirical correlation to observed outburst risk, Jessica Juric and Russell Thomas
Analysis of apparent resistivity change during waterproof coal pillar seepage based on finite element method, Qiang Liu, Liming Qiu, Dazhao Song, Zhenlei Li, Yi Zhu, and Jintao Dang
Compressive tests of an improved non-metallic pumpable roof support, Kent McTyer
Characterisation of roof behaviour and primary support response at Ulan West Mine, Terry Medhurst, Adrian Moodie, and Brian Vorster
Influence of seam-level bedding plane shears on overburden behaviour around underground coal mines, Ken Mills
Aspects of testing tendon supports for strength, effective installation, and performance in different ground formation, Adel Mottahedi, Naj Aziz, Ali Mirzaghorbanali, Alex Remennikov, and Sina Anzanpour
Coal burst phenomenon in underground coal mining: triggering mechanisms and causative factors, Adel Mottahedi, Naj Aziz, Alex Remennikov, and Mohammad Ataei
Open-pit mining auto transport data processing, Borya Orkhontuul, Tsend-Ayush Battsetseg, Tserenbaljir Serchmaa, Ulziibayar Oyunkhuu, Natsagdorj Zulaa, and Udanbor Batsanaa
Determination of fuel consumption of dump trucks depending on mining and technical conditions, Borya Orkhontuul, Bayaraa Byambadagva, Baldan Purevtogtokh, Udanbor Uyansanaa, and Damba Badamgarav
The method of coal and gas outburst risk zones division based on quantitative coupling of gas and stress, Yujie Peng, Dazhao Song, Xueqiu He, Liming Qiu, Anhu Wang, Gang Yang, Litao Wang, and Limin Qie
Finite element modelling of fully encapsulated cable bolts in laboratory large scale pull out test, Ashkan Rastegarmanesh, Ali Mirzaghorbanali, Kevin McDougall, Naj Aziz, Sina Anzanpour, and Hadi Nourizadeh
PCD bit developments to improve bolt load transfer and decrease drilling times, Warren Roach
Preliminary determination of copper recovery in the leaching process of Erdenetiin-Ovoo oxidized ore deposit, Gantulga S, Tsend-Ayush Ts, Sarnai A, and Altantuya B
Finite element simulation of fully grouted rock bolts behaviour across varied bore hole diameters, Behshad Jodeiri Shokri, Ali Mirzaghorbanali, Waru Karunasena, Kevin McDougall, Naj Aziz, Shima Entezam, Hadi Nourizadeh, Amin Motallebiyan, and Alireza Entezam
Optimising adjacent goaf drainage operations by utilising automated control logic at Kestrel South Mine, William Sloan, Michael Desira, and Tim Huston
Maximising the AI opportunity in the mining industry, Barry Smart
What future for the mining engineer, society and humankind?, Brian G. D Smart
Spontaneous combustion hazard likelihood assessment of low reactivity coals, Jan Theiler and Basil Beamish
Trends in mining education, recruitment and employee development, Ray Tolhurst
xCell Cyclops: the experience of measuring convergence in hard rock mines, Osvaldo Vallati, Bradley Darlington, and Peter Young
The influence of drilling technology on the qualitative assessment of the rock mass, Petr Waclawik, Radovan Kukutsch, and Martin Vavro
A simulation model to access the impact of underground coal mine logistics strain on an operation, David Walker, Ernest Baafi, and Senevi Kiridena
Investigating the potential of mine-based geothermal energy systems, Pabasara Wanniarachchige
Study on safe width of pillar in deep coal seam group mining, Gang Yang, Minggong Guo, Dazhao Song, Liming Qiu, and Junjun Quan
Coal strength measurement by stereo digital image correlation, Xiaohan Yang, Mehdi Serati, and Paul Buddery
Experimental study on stress-seepage characteristics of fractured shale from the Longmaxi Formation in China, Lei Zhang, Xiaochuan Yuan, Naj Aziz, and Yongcheng Liu
Adsorption behavior of silica nanofluid on coal and its injection enhancement mechanism, Tiancheng Zhang, Quanle Zou, and Zhongwei Chen