Development of MoS2-CNT composite thin film from layered MoS2 for lithium batteries
RIS ID
79386
Abstract
Layered MoS 2 prepared by liquid-phase exfoliation has been blended with single-walled carbon nanotubes (SWNTs) to form novel composite thin films for lithium battery applications. The films were formed by vacuum filtration of blended dispersions onto nitrocellulose membranes. The resulting composite films were transferred onto Cu foil electrodes via a facile filtration//wet transfer technique from nitrocellulose membranes. The morphology of the fi lm was characterised by fi eld emission scanning electron microscopy, which suggests that the MoS 2 -SWNT composite fi lm shows good adherence to the Cu foil substrate. The MoS 2 -SWNT composite thin fi lms show strong electrochemical performance at different charge-discharge rates.
The capacity of a MoS2-SWNT composite film with thickness of 1um is approximately 992 mAh g-1 after 100 cycles. The morphology study showed that the MoS2-SWNT thin film retains structural integrity after 100 cycles, while the MoS2 thin film without SWNTs displays significant cracking. In addition, the novel composite thin film preparation and transfer protocols developed in this study could be extended to the preparation of various layered-material based composite films, with the potential for new device designs for energy applications.
Grant Number
ARC/LP100100802
Publication Details
Wang, J., Lu, L., Lotya, M., Coleman, J., Chou, S., Liu, H. K., Minett, A. I. & Chen, J. (2013). Development of MoS2-CNT composite thin film from layered MoS2 for lithium batteries. Advanced Energy Materials, 3 (6), 798-805.