University of Wollongong
Browse

Local and extended atomic structure of strained polycrystalline In(1-x)Al(x)Sb alloys

journal contribution
posted on 2024-11-17, 16:28 authored by Charles A Bolzan, Bernt Johannessen, Zhibin Wu, Raquel Giulian
In Al Sb films were deposited on amorphous SiO by magnetron sputtering with four different In/Al concentration ratios and the local and extended atomic structure were investigated through extended x-ray absorption fine structure (EXAFS) spectroscopy and grazing incidence x-ray diffraction (GIXRD) analyses, respectively. GIXRD showed the deposited films are strained polycrystalline, however, preserving the cubic symmetry of zinc blende structure due to homogeneous compression. EXAFS analysis of In and Sb atoms in strained In Al Sb films provided information about the interatomic distance distributions of the first three nearest-neighbor (NN) shells. For the first NN, the average cation-anion distances presented only the alloying effect, resembling the unstrained ternary alloy with a relaxation parameter of ε=0.77±0.01 and ε=0.79±0.01 for the dilute limit InSb:Al and AlSb:In, respectively, and with the extra structural modifications due to the strain factor appearing in higher coordination shells only. In the second NN shell distance it was observed that the strain effect is more pronounced in In–Al than In–In interatomic distance, which is, within uncertainty, independent of strain, evidencing an anisotropy in the process of accommodating the strain in the mixed sublattice, which is favored by bond bending over bond stretching, similarly to unstrained III-V ternary alloys. On the other hand, anion-anion distances exhibited a bimodal distribution, showing a tendency to retain the values of unstrained pure compounds. The third NN shell mean distances vary linearly with concentration. Moreover, the core effect in Al Sb alloys was described via EXAFS demonstrating that elastic continuous medium theory is not adequate to describe this system. Using x-ray absorption near edge structure, it was observed that In K-edge position is constant with In/Al ratio in Al Sb alloys, whereas Sb K-edge position changed, evidencing its relation with the local atomic arrangement. (1-x) (x) 2 (1-x) (x) (1-x) (x) (1-x) (x)

History

Journal title

Journal of Physics and Chemistry of Solids

Volume

150

Language

English

Usage metrics

    Categories

    No categories selected

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC