Constructing graphene-based aerogel with bi-continuous interpenetrating networks as a multi-functional microwave absorber

The design of three-dimensional networks in graphene-based aerogels is an effective strategy for fabricating a lightweight microwave absorber with strong absorption and broad effective bandwidth. Herein, a multi-functional aerogel with bi-continuous interpenetrating networks comprised of reduced graphene oxide (RGO) and cellulose nanofiber (CNF) was developed via an “ice-dissolving” (freezing and solvent exchange) and subsequent annealing strategy. Different from the conventional step-by-step construction of two independent networks, the bi-continuous interpenetrating networks were simultaneously built in a one-step freezing process. Notably, the network structure of the aerogel can be tuned by adjusting the concentration of CNF (CCNF) during the freezing stage. When the CCNF increased from 2 to 8 wt%, the network structure transitioned from a single three-dimensional RGO skeleton to ordered bi-continuous interpenetrating networks, and then to a disordered CNF/RGO mixed network. The mutual contributions from the RGO skeleton and CNF network endowed the aerogel (14.96 mg cm−3) with improved conduct loss and optimized characteristic impedance, leading to an excellent microwave absorption capacity. Consequently, the aerogel achieved a maximum reflection loss of −68.3 dB and an effective bandwidth of 6.9 GHz, respectively. Moreover, the unique network structure also enabled the sample to have superior noise absorbing performance (normalized absorption coefficient of 0.894 in 250–6300 Hz) and good structural stability. This strategy provides a facile avenue for constructing multi-functional aerogels with bi-continuous interpenetrating networks for both microwave absorption and noise absorption applications.