University of Wollongong
Browse

Geotechnical modelling based on geophysical logging data

Download (756.38 kB)
conference contribution
posted on 2024-11-13, 08:16 authored by Peter Hatherly, Terry Medhurst, Binzhong Zhou
Computer modelling of coal seams and their properties is standard geological practice for both underground and open cut mining. It is based on correlations of coal seams made between boreholes and the interpolation of relevant coal seam properties on the basis of the inferred coal seam boundaries. In the case of geotechnical studies, this same approach is not followed because there are insufficient geotechnical test results to form a basis for modelling and the geological models do not typically create boundaries for interburden rock types. Instead, geotechnical models tend to be based on coal seam geological models with test results shown as point data in the interburden intervals. This situation can be improved if geophysical logging data are used as the basis for geotechnical modelling. Appropriately analysed, these logs provide continuous measurements of lithological and geotechnical properties. In the case of natural gamma data, an analysis to show the variations in clay content allows sandstones to be separated from finer grained siltstones. If geophysical strata rating values are determined from the geophysical logs, they provide a measure of rock quality. From these analyses, 3D models showing interburden properties as well as boundaries of the relevant rock types can be created and used as a basis for mine design and control of geotechnical hazards.

History

Citation

P. Hatherly, T. Medhurst and B. Zhou, Geotechnical modelling based on geophysical logging data, 13th Coal Operators' Conference, University of Wollongong, The Australasian Institute of Mining and Metallurgy & Mine Managers Association of Australia, 2013, 21-26.

Language

English

Usage metrics

    Categories

    Keywords

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC