University of Wollongong
Browse

Behavioural Modelling of High Temperature Superconducting Wires and Coils for Power Engineering Applications

Download (262.2 kB)
conference contribution
posted on 2024-11-13, 14:32 authored by Thomas Hardjono, Christopher CookChristopher Cook, Sarath PereraSarath Perera
Many aspects of the behaviour of high temperature superconducting (HTS) wires are well understood for dc applications. However, models of HTS suitable for use in circuit analysis by power engineers designing HTS applications are not readily available. This paper describes the initial development of suitable models for HTS wire. The V-I characteristics for wires carrying dc transport current can be empirically determined using a power law V=kIn. Experimentally measured V-I characteristics are fitted using the above power law. This enables the simulation of the behaviour of Bi-2223/Ag wire using the well-known circuit simulator PSpice. Other factors affecting the dc critical current density of the wire, such as bending diameter and some aspects of perpendicular and parallel applied magnetic fields have also been considered in the model. The performance of the model with dc current is compared with experimental results from a non-inductive pancake coil prepared using Bi-2223/Ag 27-core multifilament tape, as well as two short HTS tapes with different critical current ratings.

History

Citation

T. Hardjono, C. David. Cook & S. Perera, "Behavioural Modelling of High Temperature Superconducting Wires and Coils for Power Engineering Applications," in AUPEC 2000. Innovation for Secure Power., 2000, pp. 307-312.

Pagination

307-312

Language

English

RIS ID

5478

Usage metrics

    Categories

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC