University of Wollongong
Browse

Two Decades of Advancement in Process Simulation Testing of Ballast Strength, Deformation, and Degradation

Download (1.82 MB)
chapter
posted on 2024-11-14, 08:45 authored by Buddhima Indraratna, Ngoc Trung Ngo, Sanjay Nimbalkar, Cholachat Rujikiatkamjorn
This paper describes salient features of a set of large-scale ballast testing equipment developed at the University of Wollongong, Australia, and how the test results and research outcomes have contributed to transforming tracks in the Australian heavy haul and commuter networks, particularly with regards to the strength, deformation, and degradation of ballast. Ideally, ballast assemblies should be tested in prototype scale under actual loading conditions. This is because a reduction in particle sizes for testing in smaller equipment can reduce the internal angle of friction (shearing resistance) of the granular assembly in a macro sense, and the angularity of the particles in a micro sense, and hence the volumetric changes during the shearing process. In response to the worldwide lack of proper test facilities for ballast, the University of Wollongong has, since the early 1990s, designed and built a number of large-scale process simulation triaxial testing rigs. They are all custom made to minimize any boundary effects and also to evaluate the deformation and degradation of ballast, particularly the size, shape, and origin of aggregates used as ballast in Australian tracks. This triaxial process simulation equipment was originally used to characterize the behavior of coarse aggregate used for state railway standards for monotonic loading, but since then it has been fitted with dynamic actuators to simulate actual track conditions involving the true cyclic loading nature while also capturing the wheel-rail dynamics that correspond to high-speed commuter rail and fast heavy-haul operations. These tests invariably demonstrated completely different stress-strain and volumetric characteristics of ballast compared to conventional static or monotonic testing of the same test specimens.

History

Citation

Indraratna, B., Ngo, N., Nimbalkar, S. & Rujikiatkamjorn, C. (2018). Two Decades of Advancement in Process Simulation Testing of Ballast Strength, Deformation, and Degradation. In T. D. Stark, R. H. Swan & R. Szecsy (Eds.), Railroad Ballast Testing and Properties (pp. 11-38). West Conshohocken, United States: ASTM International. www.astm.org

Parent title

RAILROAD BALLAST TESTING AND PROPERTIES

Volume

1605

Pagination

11-38

Language

English

RIS ID

122898

Usage metrics

    Categories

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC