Papers from 2010
Using a seismic survey to measure the shear modulus of clean and fouled ballast, p Anbazhagan, Buddhima Indraratna, Cholachat Rujikiatkamjorn, and Lijun Su
Seismic site classification practice in Australia, China and India: suitability, P Anbazhagan, Neaz Sheikh, and Hing-Ho Tsang
Sorption of steroidal hormones by electrodialysis membranes, Laura J. Banasiak and Andrea I. Schafer
Polynomial chaos-based parameter estimation methods applied to a vehicle system, Emmanuel D. Blanchard, Adrian Sandu, and Corina Sandu
A polynomial chaos-based kalman filter approach for parameter estimation of mechanical systems, Emmanuel D. Blanchard, Corina Sandu, and Adrian Sandu
Energy-based approach for the evaluation of low cycle fatigue behaviour of 2.25Cr-1Mo steel at elevated temperature, Mark D. Callaghan, S.R Humphries, M Law, M Ho, P Bendeich, Huijun Li, and W.Y Yeung
Evaluation of high temperature fatigue behaviour of P22 by miniature specimen testing, M D. Callaghan, S. R Humphries, M Law, H Li, and W.Y Yeung
Influence of shielding gas on fume formation rate and particle size distribution for optimised GMAW, Kristin R. Carpenter, Brian J. Monaghan, Alexander D. Nicholson, Dominic Cuiuri, and John Norrish
The effects of C substitution and disorder on the field dependent critical current density in MgB2 with nano-SiC additions, S K. Chen, Xun Xu, Jung Ho Kim, Shi Xue Dou, and JL MacManus-Driscoll
Geotechnical analysis of slopes and landslides: achievements and challenges, R. Chowdhury and P. Flentje
Mechanisms of x-ray emission from peeling adhesive tape, Evan Constable, Josip Horvat, and R. A. Lewis
Recrystallization, A mechanism to control the microstructure during and following hot deformation of steels, A Dehghan-Manshadi
Dissolution of precipitates in hot rolled low Mn, Ti added pipeline steels, A Dehghan-Manshadi and Rian J. Dippenaar
Precipitates behavior during thermomechanical processing of low Mn, Ti added pipeline steels, Ali Dehghan-Manshadi and Rian J. Dippenaar
The behavior of precipitates during hot-deformation of low-manganese, titanium-added pipeline steels, Ali Dehghan-Manshadi and Rian J. Dippenaar
Effect of microstructural morphology on the mechanical properties of titanium alloys, A Dehghan-Manshadi, M H. Reid, and R J. Dippenaar
Effect of microstructural morphology on the mechanical properties of titanium alloys, A Dehghan-Manshadi, M H. Reid, and R J. Dippenaar
Effect of isothermal dissolution and re-precipitation of austenite on the mechanical properties of duplex structures, A Dehghan-Manshadi, A Shokouhi, and P.D Hodgson
Development of a comprehensive model for oxygen steelmaking, Neslihan Dogan, Geoffrey A. Brooks, and Muhammad A. Rhamdhani
Kinetics of decarburization reaction in oxygen steelmaking process, Neslihan Dogan, Geoffrey A. Brooks, and Muhammad A. Rhamdhani
Devitrification studies of Mg60Cu29Gd11 bulk metallic glass, Daniel East, Mark Reid, Mark A. Gibson, Rian J. Dippenaar, and Robert O'Donnell
Bioengineering ground improvement considering root water uptake model, Behzad Fatahi, Hadi Khabbaz, and Buddhima Indraratna
Periodic and continuous landslide monitoring to assess landslide frequency – selected Australian examples, P. Flentje, R. Chowdhury, A. S. Miner, and C. Mazengarb
Mechanical, microstructure and texture properties of interstitial-free steel and copper subjected to equal channel angular extrusion and cold-rolling, A A. Gazder, S S. Hazra, C F. Gu, W Q. Cao, C H J Davies, and E V. Pereloma
Analytical solutions for a single vertical drain with time-dependent vacuum combined surcharge preloading in membrane and membraneless systems, Xueyu Geng, Buddhima Indraratna, and Cholachat Rujikiatkamjorn
Analysis of soil disturbance associated with mandrel-driven prefabricated vertical drains using an elliptical cavity expansion theory, Ali Ghandeharioon, Buddhima Indraratna, and Cholachat Rujikiatkamjorn
Buoyancy-driven flows in pipelines - effect on hydrostatic test measurements, Ajit Godbole, Paul Cooper, Phillip Venton, and John Hough
Design and optimization of a novel on-torch fume extraction device using CFD and fluid simulation, Ajit R. Godbole, Paul Cooper, and John Norrish
A tool for online mechanics learning resource sharing, Thomas Goldfinch, Anne Gardner, Timothy McCarthy, Alan Henderson, Giles Thomas, and Anna L. Carew
Transferring advanced physics research tools to education: how to teach simulation tools used in radiation physics research to university students, Susanna Guatelli, Catherine Anne Layton, Dean L. Cutajar, and Anatoly Rozenfeld
In vivo real-time rectal wall dosimetry for prostate radiotherapy, Nicholas Hardcastle, Dean L. Cutajar, Peter E. Metcalfe, Michael L F Lerch, Vladimir L. Perevertaylo, Wolfgang A. Tome, and Anatoly B. Rozenfeld
Evaluating online multiple choice quizzes as formative assessment tools in an engineering fluid mechanics subject, David B. Hastie and Thomas Goldfinch
Conveyor belt trajectories - comparing predicted to experimental results, David B. Hastie and P W. Wypych
Experimental validation of particle flow through conveyor transfer hoods via continuum and discrete element methods, David B. Hastie and P W. Wypych
Influences on the prediction of conveyor trajectory profiles, David B. Hastie, P W. Wypych, and P C. Arnold
An assessment of bulk and local stored energy measurements in ultrafine grained interstitial free steel, Sujoy S. Hazra, Azdiar A. Gazder, and Elena V. Pereloma
Pure drug nanoparticles in tablets: What are the dissolution limitations?, Desmond Heng, Keiko Ogawa, David Cutler, Hak-Kim Chan, Judy A. Raper, Lin Ye, and Jimmy Yun
Recent advances in the application of vertical drains and vacuum preloading in soft soil stabilisation, Buddhima Indraratna
Nonlinear analysis for a single vertical drain including the effects of preloading considering the compressibility and permeability of the soil, Buddhima Indraratna, Xueyu Geng, and Cholachat Rujikiatkamjorn
Review of methods of analysis for the use of vacuum preloading and vertical drains for soft clay improvement, Buddhima Indraratna, Xueyu Geng, and Cholachat Rujikiatkamjorn
Stabilization of an erodible soil using a chemical admixtures, Buddhima Indraratna, M.A.A Mahamud, J S. Vinod, and Vasantha Wijeyakulasuriya
Investigation on effectiveness of a prefabricated vertical drain during cyclic loading, Buddhima Indraratna, Jing Ni, and Cholachat Rujikiatkamjorn
Field assessment of the performance of a ballasted rail track with and without geosynthetics, Buddhima Indraratna, Sanjay Nimbalkar, David Christie, Cholachat Rujikiatkamjorn, and Jayan Sylaja J S Vinod
The behaviour of ballasted track foundations: Track drainage and geosynthetic reinforcement, Buddhima Indraratna, Sanjay Nimbalkar, and Nayoma Chulani Tennakoon
A shear-displacement criterion for soil-infilled rock discontinuities, Buddhima Indraratna, D A F Oliveira, and E T. Brown
Effect of soil-infilled joints on the stability of rock wedges formed in a tunnel roof, Buddhima Indraratna, David A. Oliveira, E. T. Brown, and Andre de Assis
Performance of a PRB for the Remediation of Acidic, Buddhima Indraratna, Gyanendra Regmi, Long D. Nghiem, and Alexandra N. Golab
Performance of a prb for the remediation of acidic groundwater in acid sulfate soil terrain, Buddhima Indraratna, Gyanendra Regmi, Long Duc Nghiem, and Alexandra Golab
Class A prediction of the behavior of soft estuarine soil foundation stabilized by short vertical drains beneath a rail track, Buddhima Indraratna, Cholachat Rujikiatkamjorn, Brook Eewers, and Mark Adams
Sustainable soil improvement via vacuum preloading, Buddhima Indraratna, Cholachat Rujikiatkamjorn, Richard Kelly, and Henk Buys
Soft soils improved by prefabricated vertical drains: performance and prediction, Buddhima Indraratna, C Rujikiatkamjorn, V Wijeyakulasuriya, G McIntosh, and R Kelly
Experimental and numerical study of railway ballast behavior under cyclic loading, Buddhima Indraratna, Pramod Kumar Thakur, and Jayan S. Vinod
Adding value to physics laboratories for pre-service teachers, Lorna Jarrett, George J. Takacs, and Brian Ferry
A study of the continous cooling behaviour and effect of preheat and interpass temperature on the HAZ of high strength quenched and tempered steel, Lenka Kuzmikova, Mark Callaghan, Nathan Larkin, Robert Scott, Robert De Jong, Huijun Li, and John Norrish
Methods developed for the fabrication of a thermally-induced polypyrrole bilayer micro/nanoactuator, C C. Lee, Babita Gaihre, G M. Spinks, G Alici, and J Cairney
A study of the strength of lime treated soft clays, Martin D. Liu, Stephen Pemberton, and Buddhima Indraratna
Scrap-tyre soil mixture for seismic protection, M S. Mashiri, M Neaz Sheikh, J S. Vinod, and Hing Ho Tsang
Designing a Landslide Database; lessons from Australian examples, C. Mazengarb, P. Flentje, A. S. Miner, and M. Osuchowski
Performance enhancement of a complex chilled water system using a check valve: experimental validation, Zhenjun Ma, Shengwei Wang, and Dian-ce Gao
Landslide Recognition using LiDAR derived Digital Elevation Models-Lessons learnt from selected Australian examples, A. S. Miner, P. Flentje, C. Mazengarb, and D. J. Windle
A Comparative Study of Various Data Mining Techniques as applied to the Modeling of Landslide Susceptibility on the Bellarine Peninsula, Victoria, Australia, A. S. Miner, P. Vamplew, D. J. Windle, P. Flentje, and P. Warner
Liquid iron wetting of calcium aluminates, Brian J. Monaghan, Michael Chapman, and Sharon A. Nightingale
Some comments on the study of metallurgical coke and its use in the iron blast furnace: understanding process fundamentals through laboratory studies, Brian J. Monaghan, Michael Chapman, Sharon A. Nightingale, John G. Mathieson, and Robert Nightingale
Carbon Transfer in the Lower Zone of a Blast Furnace, Brian J. Monaghan, Sharon A. Nightingale, and Michael Chapman
The effects of an applied voltage on the corrosion characteristics of dense MgO, Brian Joseph Monaghan, Sharon April Nightingale, Qiang Dong, and Michael Funcik
Synthesis, structural characterization and magnetic properties of iron boride nanoparticles with or without silicon dioxide coating, Mislav Mustapic, Damir Pajic, Nikolina Novosel, Emil Babic, Kreso Zadro, Marina Cindric, Josip Horvat, Zeljko Skoko, Mirjana Bijelic, and Andrey Shcherbakov
Stress analysis in failed roof at a longwall face, J A. Nemcik, Ian Porter, and Buddhima Indraratna
Solar-powered compaction garbage bins in public areas: a preliminary economic and environmental evaluation, Long D. Nghiem and Poppy Coleman
Effect of amplification on seismic stability of Tailings dam, Sanjay Nimbalkar and Deepankar Choudhury
Comparison between models of rock discontinuity strength and deformation, David Americo Fortuna Oliveira and Buddhima Indraratna
From imaging to dosimetry: GEANT4-based study on the application of Medipix to neutron dosimetry, M A. Othman, D G. Marinaro, M Petasecca, S Guatelli, D L. Cutajar, M L. F Lerch, D A. Prokopovich, M I. Reinhard, J Uher, J Jakubek, S Pospisil, and A B. Rosenfeld
Monte Carlo study of mosfet packaging, optimised for improved energy response: single mosfet filtration, M A. R Othman, D L. Cutajar, N Hardcastle, S Guatelli, and A B. Rosenfeld
Application of agency theory to collaborative supply chains, Lena Plambeck and Peter R. Gibson
Detection of biochar components for soil fertility using THz-TDS, E M. Pogson, J Horvat, R A. Lewis, and S D. Joseph
Design and implementation of edge detection algorithm in dsPIC embedded processor, Prashan Premaratne, Sabooh Ajaz, Ravi Monaragala, Nalin Bandara, and Malin Premaratne
A decision support system for concrete bridge maintenance, Maria Rashidi, Brett P. Lemass, and Peter R. Gibson
Radial consolidation modelling incorporating the effect of a smear zone for a multilayer soil with downdrag caused by mandrel action, Cholachat Rujikiatkamjorn and Buddhima Indraratna
Seismic performance-based design of bridges with quantitative local performance criteria, M Neaz Sheikh and Frederic Legeron
Yield curvature for seismic design of circular reinforced concrete columns, M. Neaz Sheikh, H. H. Tsang, T. J. McCarthy, and N.T.K Lam
Towards teaching and research parity: a teaching quality and reward framework, Ray Stace and Brett Lemass
Flow-induced vibration mitigation using attached splitter-plates, B. Stappenbelt
Splitter-plate wake stabilisation and low aspect ratio cylinder flow-induced vibration mitigation, Brad Stappenbelt
The influence of action learning on student perception and performance, Brad Stappenbelt
Mechanical Model of a Floating Oscillating Water Column Wave Energy Conversion Device, Brad Stappenbelt and Paul Cooper
The effect of voltage and metal-transfer mode on particulate fume size during the GMAW of plain carbon steel, Zoran Sterjovski, John Norrish, and Brian J. Monaghan
Symbolic modelling of dynamic human motions, David A. Stirling, Amir S. Hesami, Christian H. Ritz, Kevin Adistambha, and Fazel Naghdy
An evaluation of fouled ballast in a laboratory model track using ground penetrating radar, Li-jun Su, Cholachat Rujikiatkamjorn, and Buddhima Indraratna
Improving the ductility of welded connections in rectangular hollow sections, Lip H. Teh and G. J. Hancock
Assessment of subballast filtration under cyclic loading, Laricar D. Trani and Buddhima Indraratna
Experimental investigations into subballast filtrations behaviour under cyclic conditions, Laricar Dominic Ortega Trani and Buddhima Indraratna
Use of impedance probe for estimation of porosity changes in saturated granular filters under cyclic loading: calibration and application, Laricar Dominic Ortega Trani and Buddhima Indraratna
The use of particle size distribution by surface area method in predicting the saturated hydraulic conductivity of graded granular soils, L. D O. Trani and Buddhima Indraratna
Regional differences in attenuation modelling for Eastern China, H H. Tsang, M N. Sheikh, N.T.K Lam, A M. Chandler, and S H. Lo
Geotechnical seismic isolation by scrap tire -soil mixtures, Hing Ho Tsang, Nelson T. K Lam, Saman Yaghmaei-Sabegh, M Neaz Sheikh, and Buddhima Indraratna
Displacement design spectrum model accounting for non-linear site effects, Hing-Ho Tsang, M Neaz Sheikh, Srikanth Venkatesan, and Nelson T. K Lam
An alternative method for probabilistic seismic-hazard assessment: a case study of three cities, Hing Ho Tsang, Saman Yaghmaei-Sabegh, P Anbazhagan, M Neaz Sheikh, T G. Sitharam, and J S. Vinod
Multidisciplinary expertise applied to Underground Coal Mining R and D Projects with emphasis on Adoption of Lean Automation Techniques, Stephen van Duin, Christopher David Cook, Chris A. Lukey, Geoffrey Maxwell Spinks, Ian Porter, Ernest Y. Baafi, and Jan Anton Nemcik
Internal erosional behaviour of lignosulfonate treated dispersive clay, J S. Vinod, Buddhima Indraratna, and M A. A Mahamud
Determination of coefficient of radial consolidation using steepest tangent fitting method, J S. Vinod, Buddhima Indraratna, and A Sridharan
Superconducting transition width under magnetic field in MgB2 polycrystalline samples, C.C Wang, R Zeng, Xun Xu, and S X. Dou
