RIS ID
79941
Abstract
Nano-magnetite (Fe3O4) particles have a potential to lead to the formation of lubrication tribofilm that reduces the friction and wear in hot steel strip rolling. In this paper, an attempt to fabricate the oxide film with magnetite precipitates from thermally-grown wustite (Fe1-xO) layer during isothermal cooling of low carbon microallyed steel, was obtained. The precipitation behaviors were investgated on Gleeble 3500 thermo-mechanical simulator under the humid air with water vaour content of 19.5 per vol percent. Several types of magnetite precipitates were examined using scanning electron microscope (SEM) with energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) analysis. The tribological properties of magnetite precipitates were investigated in pin-on-disc configuration. It was found that the dispersed magnetite particles originate from either the pro-eutectoid precipitation above 570 degrees celcius or the partical decomposition of wustite below 570 degrees celcius. The oxide film on the presence of free particles durin g eutectoid precipitation could be a lubricant and consequently resist wear, particularly for the oxide scale with a typical thickness in the range of 8 to 11 um in dry ai and moisture atmosphere. Furthermore, characterisation and precipitation process of the oxide scale are discussed, with respect to a probable mechanism to explain the lubricated properties has been proposed.
Publication Details
Yu, X., Jiang, Z., Wei, D., Zhou, C., Huang, Q. & Yang, D. (2013). Tribological properties of magnetite precipitate from oxide scale in hot-rolled microalloyed steel. Wear, 302 (1-2), 1286-1294.